SWR high on transmit low on analyzer

SWR on the 10m loop is 1.0 on the analyzer but goes to 4 bars when transmitting on 28.120.

Found the problem.  Simple mistake. The loop tuning RC receiver was turned on and the RC TX was also on.  Key the 857D, the SWR goes bonkers (because of the intense RF), but when I unkey and check with the analyzer, the SWR goes to 1.0 because the RC is set to the right frequency.

Laws of gravity are still in effect.

~ by marksun on May 8, 2014.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

 
%d bloggers like this: